Autowatch Ghost Immobiliser

Ghost Immobiliser is a renowned product that safeguards your vehicle from key-cloning hacking and theft. This TASSA-certified system is unnoticeable by thieves and blocks your vehicle from starting.

This silent device uses buttons on your car's steering wheel, door panels and the centre console to allow you to create a unique, PIN sequence that can be changed up to 20 characters which must be entered before the car is able to start.

Easy to install

With car crime on the rise and cloning equipment readily available it is more crucial than ever to secure your vehicle. Our Autowatch Ghost immobiliser is a secure and discreet aftermarket solution to protect against key-cloning and car theft. The device is almost indestructible to thieves and operates through buttons on the steering wheel or the door panels. This allows customers to make an individual disarm sequence similar to that of credit card numbers that must be entered before the vehicle is able to start or leave. This makes the system almost impossible to spot and is unaffected by jamming or spoofing devices like those used by other systems available.

The installation of the Ghost unit is a highly skilled process and must only be done by an authorized installer. The unit is carefully incorporated into the vehicle's CAN bus system, ensuring it communicates directly to the ECU. The Ghost can be installed without altering factory settings, and it is virtually impossible for thieves to evade the system by using signal boosters.

When the Ghost is fitted, a new and improved disarm sequence is required to be inputted in order to turn on your vehicle. Press ghost ii immobiliser in 2 seconds, but ensure that you don't hold it for too long. The system will flash twice to signal that Transport Mode is active. This feature is ideal for classic, sports or luxury vehicles that have to have their security system temporarily disabled during transport or maintenance.

Once the Transport Mode is activated, your immobiliser will be removed and you will not be able to restart it by entering the PIN code. This feature is ideal for those who want to store their car during the winter months, thus preventing it from being stolen by thieves, or having to pay monthly increases in insurance premiums.

No LED indicators or key-fobs to indicate the location of the vehicle.

The Ghost immobiliser is a discreet device that shields your pride and joy from thieves who steal cars by utilizing buttons on your dashboard or steering wheel to input an unobtrusive pin code prior the start of the engine. It can be connected to a phone application to arm/disarm remotely. It also prevents signal relays, ECU swapping, and key copying. It's easy to install and can be incorporated into a variety of vehicles. It's also extremely discreet and can be concealed in places that are difficult to reach, such as behind the dashboard, or in the trim of the steering wheel.

This is a great choice for vehicles that are high-performance because it can shut off your vehicle's ignition in the event that the wrong pin code has been entered. This prevents thieves from driving away with your pride and happiness. The device can even send an alert to your mobile if you've left the car unattended in public areas, giving you peace of mind when you're away from your vehicle.

The Ghost is unlike other immobilisers in that it doesn't require any additional fobs or LED indicators. It can also be hidden in a difficult-to-reach area of your vehicle. It is highly indestructible to detection as it directly communicates with the CAN data network in your vehicle. It does not emit radio signals, which means it is inaccessible to signal jammers or RF scanners.

It's designed to be tamper-proof and weatherproof, which means it can withstand extreme temperatures. It is also impossible to be tampered with by cutting the wires, or dismantling it. Moreover, it doesn't require any cuts in the circuit to function, so it's undetectable to organized gangs of thiefs who use diagnostics reading devices to detect fitted security systems. It's not affected by diagnostic equipment that checks CAN data for the presence or absence of a security system.

No circuit cuts

The ghost device doesn't include any LED indicators or key fobs to identify its whereabouts. It is hidden under the steering wheel, dashboard or dashboard of your vehicle and uses buttons to generate a unique PIN sequence that has to be entered to turn on the engine. The thief cannot drive away the vehicle even if they have keys to your car because they don't know the correct code. The device doesn't transmit radio signals, meaning that organized criminal gangs that use diagnostics reading devices will not be able to detect the device.

This cutting edge immobiliser is TASSA approved and could help lower your insurance costs, particularly for vehicles that have been customized by their owners. It also wards off key cloning theft as well as ECU swapping, which means that the only way for a criminal can steal your joy and pride is to remove it.

The system is completely quiet as it doesn't use buttons that are found on the dashboard or in the factory keys. It communicates with the ECU via the CAN data circuit which is completely silent and doesn't give any indication that it's been installed. It means that a criminal will not be able to make new key fobs or even replace the ECU to cause your vehicle to start and therefore negates any other theft methods used in recent years like key cloning, scans using radio frequency and code theft.

If you ever forget your PIN code our engineers will provide you with an emergency reset for the device which permits you to enter'service mode'. This allows the technician or dealer to temporarily start and drive your car which allows them to complete maintenance work, MOTs, or valet parking without entering the PIN code again. Once the technician has finished their task or you have removed your vehicle, simply enter the PIN code and the device will be out of service mode based on speed and time.

No radio signals

In contrast to other security systems, the Ghost immobiliser does not rely on an alarm system or key fobs to block vehicles from getting started. Instead it communicates with vehicle's ECU and CAN data circuit to prevent the engine from starting. This makes it a quiet solution that isn't affected by key cloning techniques or RF scanning techniques employed by thieves to bypass other security devices. It can also be used with tracking systems to increase the overall safety of your vehicle and can warn you of any attempted theft or tampering.

The Autowatch Ghost, a TASSA certified device, is an insurance-approved and offers superior protection against key hacking and the cloning. It is controlled through a mobile app and is secured with encryption to protect. It also has an encrypted emergency PIN code override. It's a quiet, effective and economical way to safeguard your vehicle from theft.

However, the Ghost is not without its difficulties. Users frequently have difficulty completing the correct sequence to disarm. This is because the device requires input through buttons already located in your vehicle, for example those on the steering wheel or center console. It can be difficult for users to remember or even miss particularly when the device is being first used. It is best to read the user manual that comes with the device and then practice the disarming procedure before driving.

Another issue is that some vehicles have issues with the CAN data connections, which could affect Ghost's functionality. This could be due to faulty sensors or a damaged OBD port. It is best to test the system again prior to using it to determine if there are any issues with the CAN connection.

It is easy to change the PIN code

The Ghost is a fantastic product that has enjoyed a great reception on the market. However, the process of changing the pin code can be a bit confusing. The device is programmed by the installer at the moment of installation, but users may wish to alter it for a variety of reasons. For example they may want an alternative button that disables the device or not want their installer to be aware. It is also possible that they not like the pin code they currently have. The good news is that the switch to a new pin number is very simple. Follow the simple instructions below to learn how.

Please note that you will need to turn off the ignition but DO NOT start your vehicle! It will take only a few seconds to be completed. The vehicle will then return to normal operation.
ghost ii immobiliser