Writing My Own VGA Driver

Frank Rosner - Nov 9 '20 - - Dev Community

Why a VGA Driver?

Our operating system needs some way to interact with the user. This requires us to do some form of I/O. First, we want to focus on visual output. We will rely on the VGA 80x25 text video mode as it is very convenient to handle and flexible enough for basic terminal functionality. This is the same mode that was already used by the BIOS while booting our kernel.

With VGA we can produce screen output by modifying a dedicated memory region, called the video memory, directly. In addition to that, there are specific port addresses that we can use to interact with device ports using the port I/O CPU instructions in and out. This is possible because all I/O ports (including the VGA ports) are mapped to specific memory locations.

The task of our VGA driver will be to encapsulate these low level memory manipulations within higher level functions. Instead of issuing individual CPU instructions and modifying memory addresses we want to be able invoke a function to print a string on the screen or clear all output. In this post we are going to write such a minimal VGA driver.

The remainder of the article is structured as follows. The next section explains how we can interface with I/O ports using C. Afterwards we will put this knowledge to use and implement functions to retrieve and set the text cursor position. Then we will write code to print individual characters on the screen by writing to the video memory. We will combine the cursor manipulation with the character printing to provide functionality for printing strings to the screen. The sections after that focus on a few extensions such as handling newline characters, scrolling, as well as clearing the screen. The final section adjusts the main kernel function to make use of our newly written driver.

The source code is available on GitHub.

Interfacing with I/O Ports from C

One important part of I/O drivers is be the ability to interface with I/O devices through ports. In our VGA driver we only need to access the ports 0x3d4 and 0x3d5 for now, in order to read and set the cursor position while in text mode.

As mentioned earlier, we can utilize the in and out instructions to read and write port data, respectively. But how do we make use of those instructions from within C?

Luckily, the C compiler supports inline assembler code by calling the __asm__ function that lets us write assembler code, passing C variables as input and writing results back into C variables. The assembler instruction, the output parameters, and the input parameters of the __asm__ function are separated by :. The syntax is a bit different compared to NASM, e.g. the order of the instruction operands is reversed.

Let's take a look at the following two functions to read/write data from/to a specified port.



unsigned char port_byte_in(unsigned short port) {
    unsigned char result;
    __asm__("in %%dx, %%al" : "=a" (result) : "d" (port));
    return result;
}

void port_byte_out(unsigned short port, unsigned char data) {
    __asm__("out %%al, %%dx" : : "a" (data), "d" (port));
}
Enter fullscreen mode Exit fullscreen mode

For our port_byte_in function we map the C variable port into the dx register, execute in al, dx, and then store the value of the al register into the C variable result. The port_byte_out function looks similar. It executes out dx, al, mapping the port to dx and the data to al. As we are only writing data there are no output parameters and the function has no return value.

Getting and Setting the Cursor Position

With our newly written port I/O functions we are ready to interact with the VGA text mode cursor. In order to read or change the cursor position we need to modify the VGA control register 0x3d4 and read from or write to the respective data register 0x3d5.

The 16 bit cursor position is encoded as 2 individual bytes, the high and the low byte. The data register will hold the low byte if the control register is set to 0x0f, and the high byte if the value 0x0e is used. First we will define the register addresses and the codes for our offset as C constants.



#define VGA_CTRL_REGISTER 0x3d4
#define VGA_DATA_REGISTER 0x3d5
#define VGA_OFFSET_LOW 0x0f
#define VGA_OFFSET_HIGH 0x0e
Enter fullscreen mode Exit fullscreen mode

We are going to represent our cursor offset as the video memory offset. The memory offset is twice the cursor offset, because each position in the text grid is represented by 2 bytes, one for the character and one for color information.

As we cannot fit a memory offset having twice the size of a 16 bit cursor offset into a 16 bit short, we will use a 32 bit integer. And now we can write a set_cursor and a get_cursor function that takes our internal cursor offset.



void set_cursor(int offset) {
    offset /= 2;
    port_byte_out(VGA_CTRL_REGISTER, VGA_OFFSET_HIGH);
    port_byte_out(VGA_DATA_REGISTER, (unsigned char) (offset >> 8));
    port_byte_out(VGA_CTRL_REGISTER, VGA_OFFSET_LOW);
    port_byte_out(VGA_DATA_REGISTER, (unsigned char) (offset & 0xff));
}

int get_cursor() {
    port_byte_out(VGA_CTRL_REGISTER, VGA_OFFSET_HIGH);
    int offset = port_byte_in(VGA_DATA_REGISTER) << 8;
    port_byte_out(VGA_CTRL_REGISTER, VGA_OFFSET_LOW);
    offset += port_byte_in(VGA_DATA_REGISTER);
    return offset * 2;
}
Enter fullscreen mode Exit fullscreen mode

Note that because our memory offset is double the cursor offset, we have to map the two offsets by multiplying or dividing by 2. We also have to do some bit shifting / masking in order to retrieve the high and the low byte from our integer.

Printing a Character on Screen

Having the cursor manipulations in place, we also need to be able to print characters at a specified position on screen. We already did that in our dummy kernel in the previous post. So let's take that code and make it a bit more generic. First, we will define a few helpful constants containing the starting address for the video memory, the text grid dimensions, as well as a default coloring scheme to use for our characters.



#define VIDEO_ADDRESS 0xb8000
#define MAX_ROWS 25
#define MAX_COLS 80
#define WHITE_ON_BLACK 0x0f
Enter fullscreen mode Exit fullscreen mode

Next, let's write a function to print a character on screen by writing it to the video memory at a given memory offset. We are not going to support different colors for now but we can adjust this later if needed.



void set_char_at_video_memory(char character, int offset) {
    unsigned char *vidmem = (unsigned char *) VIDEO_ADDRESS;
    vidmem[offset] = character;
    vidmem[offset + 1] = WHITE_ON_BLACK;
}
Enter fullscreen mode Exit fullscreen mode

Now that we can print characters on screen and modify the cursor, we can implement a function that prints a string and moves the cursor accordingly.

Printing Text and Moving the Cursor

In C a string is a 0-byte terminated sequence of ASCII encoded bytes. To print a string on the screen we need to:

  1. Get the current cursor offset.
  2. Loop through the bytes of the string, writing them to the video memory, incrementing the offset.
  3. Update the cursor position.

Here goes the code:



void print_string(char *string) {
    int offset = get_cursor();
    int i = 0;
    while (string[i] != 0) {
        set_char_at_video_memory(string[i], offset);
        i++;
        offset += 2;
    }
    set_cursor(offset);
}
Enter fullscreen mode Exit fullscreen mode

Note that this code does neither handle newline characters, nor offsets that are out of bounds at this point. We can fix that by implementing scrolling functionality in case of our offset growing out of bounds, and moving the cursor to the next line when we detect a newline character. Let's look into handling newline characters next.

Handling Newline Characters

A newline character is actually a non-printable character. It does not take space in the grid but instead moves the cursor to the next line. To do that we will write a function that takes a given cursor offset and computes the new offset, which is the first column in the next row.

Before we implement that we will write two small helper functions. get_row_from_offset takes a memory offset and returns the row number of the corresponding cell. get_offset returns a memory offset for a given cell.



int get_row_from_offset(int offset) {
    return offset / (2 * MAX_COLS);
}

int get_offset(int col, int row) {
    return 2 * (row * MAX_COLS + col);
}
Enter fullscreen mode Exit fullscreen mode

Combining those two functions we can easily write the function that moves the offset to the next line.



int move_offset_to_new_line(int offset) {
    return get_offset(0, get_row_from_offset(offset) + 1);
}
Enter fullscreen mode Exit fullscreen mode

With this function at our disposal we can modify the print_string function to handle \n.



void print_string(char *string) {
    int offset = get_cursor();
    int i = 0;
    while (string[i] != 0) {
        if (string[i] == '\n') {
            offset = move_offset_to_new_line(offset);
        } else {
            set_char_at_video_memory(string[i], offset);
            offset += 2;
        }
        i++;
    }
    set_cursor(offset);
}
Enter fullscreen mode Exit fullscreen mode

Next, let's look at how we can implement scrolling.

Scrolling

As soon as the cursor offset exceeds the maximum value of 25x80x2 = 4000 the terminal output should scroll down. Without a scroll buffer the top line will be lost but this is ok for now. We can implement scrolling by executing the following steps:

  1. Move all rows but the first one by 1 row upwards. We do not need to move the top row as it would be out of bounds anyway.
  2. Fill the last row with blanks.
  3. Correct offset to be inside our grid bounds again.

The following animation illustrates the scrolling algorithm.

We can implement the row movement by copying a chunk of the video memory. First, we will write a function that copies a given number of bytes nbytes in memory from *source to *dest.



void memory_copy(char *source, char *dest, int nbytes) {
    int i;
    for (i = 0; i < nbytes; i++) {
        *(dest + i) = *(source + i);
    }
}
Enter fullscreen mode Exit fullscreen mode

With the memory_copy function at our disposal we can implement a scrolling helper function that takes a given offset, copies the desired memory region, clears the last row, and adjusts the offset to be inside the grid bounds again. We will use the get_offset helper method to conveniently determine the offset for a given cell.



int scroll_ln(int offset) {
    memory_copy(
            (char *) (get_offset(0, 1) + VIDEO_ADDRESS),
            (char *) (get_offset(0, 0) + VIDEO_ADDRESS),
            MAX_COLS * (MAX_ROWS - 1) * 2
    );

    for (int col = 0; col < MAX_COLS; col++) {
        set_char_at_video_memory(' ', get_offset(col, MAX_ROWS - 1));
    }

    return offset - 2 * MAX_COLS;
}
Enter fullscreen mode Exit fullscreen mode

Now we only need to modify our print_string function so that each loop iteration it checks if the current offset exceeds the maximum value and scroll if needed. This is the final version of the function:



void print_string(char *string) {
    int offset = get_cursor();
    int i = 0;
    while (string[i] != 0) {
        if (offset >= MAX_ROWS * MAX_COLS * 2) {
            offset = scroll_ln(offset);
        }
        if (string[i] == '\n') {
            offset = move_offset_to_new_line(offset);
        } else {
            set_char_at_video_memory(string[i], offset);
            offset += 2;
        }
        i++;
    }
    set_cursor(offset);
}
Enter fullscreen mode Exit fullscreen mode

Clearing the Screen

After the our kernel has started, the video memory will be filled with some information from the BIOS that is no longer relevant. So we need a way to clear the screen. Fortunately this function is easy to implement given our existing helper functions.



void clear_screen() {
    for (int i = 0; i < MAX_COLS * MAX_ROWS; ++i) {
        set_char_at_video_memory(' ', i * 2);
    }
    set_cursor(get_offset(0, 0));
}
Enter fullscreen mode Exit fullscreen mode

Hello World and Scrolling in Action

We can adjust our main function to print a string now! We only need to include the display header file so our compiler knows that the driver functions exist.



#include "../drivers/display.h"

void main() {
    clear_screen();
    print_string("Hello World!\n");
}
Enter fullscreen mode Exit fullscreen mode

To visualize the scrolling I wrote an extended main function that prints increasing characters, launched QEMU in debug mode, attached the GNU debugger (gdb), put a breakpoint in the print function and executed the following debug instruction to slow down the scrolling so it becomes visible.



while (1)
shell sleep 0.2
continue
end
Enter fullscreen mode Exit fullscreen mode

And this is the result:

scrolling in action

Horray! We managed to write a simple, yet working video driver that allows us to print strings on the screen. It even supports scrolling! Next up: Keyboard input :)

Cover image by Jason Scott.

If you liked this post, you can support me on ko-fi.

Image
What Is What Is The Statute Of Limitations On Asbestos Claims And Why Is Everyone Talking About It?
Image
All Terrain Self Propelled Wheelchair: A Simple Definition
Image
Zatop się w ciszy: Skuteczne sposoby na wyciszanie mieszkań
Image
Fixing numerous android build errors
Image
Ensuring Consistent Node.js Versions Across Your Team

javascript, node, npm, webdev
Image
crypto
Image
Five Killer Quora Answers To Asbestos Lawsuit Settlements
Image
A Trip Back In Time How People Talked About Navy Asbestos Settlement 20 Years Ago
Image
7 Things You Never Knew About Fabric Corner Sofa
Image
Why Grey Fabric Corner Sofa Is Still Relevant In 2024
Image
🎯 Can You Survive a Flashcrash? Let's Play!
Image
Getting started with Instagram is pretty straightforward
Image
The 10 Most Terrifying Things About Small Fabric Corner Sofa
Image
How to invest in bitcoin

webdev, beginners, react, devops
Image
E2E testing in React with Cypress

react, cypress, e2e, webdev
Image
Testes e2e em React com Cypress

react, cypress, e2e, webdev
Image
Installing FreeBSD on a HP 250 G9

freebsd, devjournal
Image
From Around The Web: 20 Fabulous Infographics About Hook Locks
Image
Fabric Corner Couch: 11 Things You've Forgotten To Do
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terabox Video Player