Let's look at some different ways you could implement the strategy pattern in C#. First, I'd like to briefly mention why we care about design patterns and where the strategy pattern fits in.

Why Should I Know The Strategy Pattern?

Understanding design patterns is a vital skill to possess as a software developer and/or software architect. If you don't, then you end up:

Wasting time while solving problems which have already been addressed by the community
Creating code that is potentially difficult to maintain
Writing code that is potentially difficult to reason about
Building software components and pieces that are potentially difficult to extend

The strategy pattern is a way of approaching problems where you have different paths of logic that are available and based on some condition(s) you need to choose one of those paths. In other words, you have too many if or switch cases and need a cleaner more extensible alternative.

For more about design patterns:

The Flow Of The Strategy Pattern

The strategy pattern follows a basic flow:

An entry point accepts a choice that was made (by a user, system, etc.)
Based on this selection, one-out-of-many algorithms or paths of logic is selected to execute.
Execute the selected algorithm.

Practical Uses Of The Strategy Pattern

A practical example that some (most?) web developers have faced is building business-oriented reporting systems. A reporting system in a web app is a good use-case for the strategy pattern:

Users can choose a certain report to execute from a list of available reports
Users can export the report in different formats
Etc.

Imagine a system with 100 types of reports to choose from. You could create 100 links on your web page. You could use 100 if statements. 100 switch cases. But what if users can now choose a selection of reports that get automated into an email every day? Now you can't use links. And those if statements get pretty messy and unmaintainable - especially as new requirements cause nested if statements. There is a better way - the strategy pattern.

Basic Implementation

Let's look at a very basic implementation. I'm going to use a very "stupid simple" example of a console app calculator having 4 operations (always two numbers):

Add
Subtract
Multiply
Divide

This is in an attempt to avoid distractions in trying to grasp this pattern, which can be applied to more complicated business problems.

Here's the basic example:

// We have 4 methods that perform a calculation using 2 integers.
// These are our available algorithms to select from.
private static int Add(int a, int b) => a + b;
private static int Minus(int a, int b) => a - b;
private static int Multiply(int a, int b) => a * b;
private static int Divide(int a, int b) => a / b;

Ignoring user input and output, in the same class you would have the "strategy":

switch (userChoice)
{
    case "+":
        result = Add(numOne, numTwo);
        break;
    case "-":
        result = Minus(numOne, numTwo);
        break;
    case "*":
        result = Multiply(numOne, numTwo);
        break;
    case "/":
        result = Divide(numOne, numTwo);
        break;
}

This implementation is:

Quick
Easy
Simple

But with more algorithms - let's say - dozens more, the file and/or class that hold all these methods and logic will become bloated very fast. And that switch statement starts to become a monster...

When To Use?

This implementation is:

A good step for those starting with the pattern
Simple for using a very small number of choices

Basic With Switch Statement Removal

This next step in the progression is to clean up the switch statement. It's too verbose - even for places with a small number of choices. The switch becomes:

Dictionary<string, Func<int, int, int>> strategies = new Dictionary<string, Func<int, int, int>>() {
    { "+", Add }, // Holding a reference to the method Add()
    { "-", Minus },
    { "*", Multiply },
    { "/", Divide }
};

Func<int, int, int> selectedStrategy = strategies[userChoice]; // userChoice is either "+", "-", "*" or "/"
int result = selectedStrategy(numOne, NumTwo);

By using a Dictionary, instead of explicitly invoking the method we want, we store a lookup of a key and value - the value being a reference to the method we want to Invoke for that key.

When To Use?

This way forces you to create other methods to handle each case, instead of inlining more logic in the current scope. You might want to use this implementation if:

You have some if or switch statements that you want to be less verbose
You have a "handful" of algorithms available to choose

The dictionary definition may be too verbose for some. In which case, we could wrap each method (Add, Subtract, etc.) in an Action (i.e. lambda) like () => Add(numOne, numTwo). We will look at using lamdas later though...

Using Interfaces

The next step is to clean up the list of methods and generalize them. What if we had another class somewhere else in our system that needed to be available to our choices of algorithms? Not to say this is a good design practice or not, but stuff happens in the real world.

Using an interface to abstract the implementation away is what we'll do here. This is the usually considered the "proper" implementation of the strategy pattern.

First, we create a new interface to abstract our math operations:

public interface IMathOperator
{
     int Operation(int a, int b);
}

Next, we implement the interface for each algorithm (one example here):

public class MathAdd : IMathOperator
{
    public int Operation(int a, int b)
    {
        return a + b;
    }
}

Finally, we can just use the interface type IMathOperator in our calling code:

Dictionary<string, IMathOperator> strategies = new Dictionary<string, IMathOperator>() {
    { "+", new MathAdd() },
    { "-", new MathSubtract() },
    { "*", new MathMultiply() },
    { "/", new MathDivide() }
};

IMathOperator selectedStrategy = strategies[userChoice];
int result = selectedStrategy.Operation(numOne, numTwo);

Now we are able to separate each algorithm into its own class/file. This allows us to look at our file system and get a better overview of what our system can do. And, it's breaking up our code more which leads to having less visual noise per file.

When To Use?

As this is the most common pattern implementation, you might use this version because:

It helps when working with a team of developers (either they already understand the pattern or when researching the pattern this is probably what they will come across)
Number of algorithms are expanding
You want to have each algorithm in its own file/class (maybe each algorithm is really complex, etc.)

Again, you can get a better overview of your system since each algorithm is in its own file. Using interfaces you also allow some flexibility for existing classes to implement this abstraction.

Expensive Object Instantiation?

A problem with the method above is that we are instantiating all the classes that we are choosing from. What if instantiating these objects is expensive? Even if not, using the following method is a quick fix that can improve performance - especially if we have a lot of implementations to choose from.

// Each key now returns a function that will instantiate an object when executed.
Dictionary<string, Func<IMathOperator>> strategies = new Dictionary<string, Func<IMathOperator>>() {
    { "+", () => new MathAdd() },
    { "-", () => new MathSubtract() },
    { "*", () => new MathMultiply() },
    { "/", () => new MathDivide() }
};

IMathOperator selectedStrategy = strategies[userChoice](); // Invoke the Func to instantiate new object

When To Use?

You are using the Dictionary technique and...

You are using expensive objects (e.g. objects that are part of an inheritance hierarchy, objects that perform some expensive operation when instantiated, objects that hold a lot of data, etc.)
There are many algorithms available (and don't want to allocate all that extra memory)

Dynamic Instantiation

You may have noticed that the strategy pattern is basically the same as the factory pattern. The factory pattern in OOP generally follows the flow:

Makes a decision to choose a concrete type of a higher level abstraction (interface, abstract class, etc.)
Instantiates it
Returns the new object.

The strategy pattern is similar in that it may do everything in the flow above, but adds one more step:

Invoke a concrete implementation of a certain abstract method (i.e. Invoke an interface's method from the concrete object).

That leads us to the idea that we can use advanced techniques used in the factory pattern to enhance our strategy pattern implementation. One of these is to instantiate objects dynamically based on the name of a class/type. In our C# implementation, we can replace the Dictionary with this, assuming that our user input is now "Add" instead of "+", etc.:

IMathOperator selectedStrategy = GetMathOperatorFromFullClassPath($"Strategy.InterfacesExample.Math{userChoice}");

Factory method:

 private static IMathOperator GetMathOperatorFromFullClassPath(string fullClassPath) => 
         // The true's mean throw exception and ignoreCase.
         Activator.CreateInstance(Type.GetType(fullClassPath, true, true)) as IMathOperator;

If we know the namespace of where our concrete implementations are, then we can dynamically instantiate the one we want based on the user's input, or a database result, etc.

When To Use?

You have many concrete types
You want to generalize the factory logic to be more concise
Quick to add new implementations since you don't need to go digging in the factory again (e.g. just add a new class and choice for the user corresponding to that class' name)

Cons are:

You introduce the possibility of more runtime errors
Need to consider error handling more closely
Code may not be as intuitive for newcomers to your project
Future refactoring becomes harder since you cannot find references to places your classes may be used

Last One: Advanced Factory

One last step! Let's introduce a more advanced/dynamic way of using reflection to dynamically "discover" which concrete implementation we may need inside our strategy pattern. But using reflection in C# we can find all the types in the current Assembly (i.e. project or library) that implement the interface we are looking for (IMathOperator). Here's what the strategy piece looks like:

// I.e. I want a "IMathOperator" object with the class name "Math[Add]" or "Math[Subtract]", etc.
IMathOperator selectedStrategy = Instantiate<IMathOperator>($"Math{userChoice}");
int result = selectedStrategy.Operation(numOne, numTwo);

Refactoring the factory function into a more flexible/reusable piece, we get:

private static T Instantiate<T>(string className)
{
    Type typeImplemented = typeof(T);
    Type selectedType = Assembly.GetExecutingAssembly() // i.e. our project/library
            .GetTypes()
            .First(t => typeImplemented.IsAssignableFrom(t) && t.Name == className);

    return (T) Activator.CreateInstance(selectedType);
}

We could simplify this and filter all the Assembly Type by the class name alone. We would just need to be more aware of naming conflicts within the entire project under all namespaces.

When To Use?

You want a reusable factory function that you can use everywhere
You have a large number of concrete strategies available
You are using the strategy pattern in other places and want a more generalized mechanism to handle them all

Cons

Potential for runtime errors
Potential for naming conflicts between classes (i.e. two classes names "MathAdd" in different namespaces might cause runtime errors if you aren't careful with what types they implement)
Not obvious how this piece may work to your project's newcomers

Conclusion

TL;DR The strategy pattern is helpful in eliminating a growing number of if and switch cases. By using interfaces or, in simpler cases, plain functions (i.e. static methods), we can introduce a more flexible, maintainable and predictable way of dealing with choosing specific algorithms or paths of logic.

My preference is to use a Dictionary to map keys of possible incoming values ("input") to the corresponding interfaces or methods to be selected and executed.

Doing this using Reflection can offer some conveniences and perhaps more flexibility, but the issue of losing track of all references to where your specific implementations are being used (since the concrete implementations are dynamically instantiated) is a pretty huge consideration.

Feedback?

Have any feedback or comments? I'd love to hear what you think or if I missed something etc.

Keep In Touch

Don't forget to connect with me on twitter or LinkedIn!

Navigating Your Software Development Career

An e-mail newsletter where I'll answer subscriber questions and offer advice around topics like:

✔ What are the general stages of a software developer?
✔ How do I know which stage I'm at? How do I get to the next stage?
✔ What is a tech leader and how do I become one?

Sound interesting? Join the community!

6 Ways To Implement The Strategy Pattern In C# (Basic To Advanced)

Why Should I Know The Strategy Pattern?

The Flow Of The Strategy Pattern

Practical Uses Of The Strategy Pattern

Basic Implementation

When To Use?

Basic With Switch Statement Removal

When To Use?

Using Interfaces

When To Use?

Expensive Object Instantiation?

When To Use?

Dynamic Instantiation

When To Use?

Last One: Advanced Factory

When To Use?

Conclusion

Feedback?

Keep In Touch

Navigating Your Software Development Career