Key Fob Repair: Replacing the Battery

When they are tossed around in pockets and purses, key fob buttons can get damaged and stop registering presses with accuracy. This issue can be addressed by replacing the small battery that is usually located in the snap-out case that comes with most car fobs.

If the contacts on the key fob are damaged, a replacement may not be sufficient to make it work again. There's an easy fix that you can try at home:

Replace the Battery

It may be time to change the battery in your key fob if it isn't working or takes longer to unlock or lock your car than usual. Replacing the battery of your key fob is one of the easy tasks you can complete yourself. It's also a cost-effective fix that can save you the hassle of an expert locksmith or dealer.

The majority of key fobs require the use of a coin-type battery (CR2032 or similar) which you can purchase at any general store or home improvement store or auto parts store. The key fobs usually have a slot to accept these batteries and opening the case to swap out batteries is relatively simple. Based on the brand you might need to use a screwdriver to open the compartment.

If your key fob comes with clips that keep the batteries in place, gently take them off them with your fingers or with non-metallic tools. Remove the battery that was in use and replace it with the new one, but be careful to note its orientation to ensure that you install it correctly. It is important to avoid touching the batteries' flat surfaces since scratches from fingers can decrease their lifespan.

Close the case of the key fob and test the function by pressing the button. If the key fob still does not work, you'll need to open it again and verify that the battery is inserted correctly.

You may also find that simply replacing the battery isn't enough to fix the problem. This could be caused by physical trauma or electrical damage. In this instance, you will be required to take your key fob to a dealership or auto service center for repairs. However, before doing this, you should be aware of four common issues that a replacement battery won't fix. It is important to be aware of these issues, to be able to seek help from a qualified technician if needed. You can also read how to fix the faulty transmitter of a key fob in order to discover the reason it's not working.

Clean the Contacts

It is crucial to keep your keys clean in order to maintain their functionality and longevity. Over time the natural oils on your fingers and pockets can build up in key fob buttons and crevices. This can lead to keys to not function. It's simple enough to fix - all you need is rubbing alcohol and a cotton swab.

Open the key fob first by gently prying the battery out using a coin or screwdriver. Make sure you note the type of battery it is (negative and positive sides) so that you can re-insert it correctly when you are finished.

Then, moisten a cotton small or swab with isopropyl (rubbing) alcohol and start cleansing the dirt off all of the fob's buttons and the surrounding areas. Pay particular attention to the battery contacts, making sure that they are free of grease or dirt. Once you're done, let the fob and its components completely dry.

If your device doesn't work after cleaning it, it could be an idea to reset the system. Consult your owner’s manual to learn how to reset the system. This could bring the key fob back to life if the problem was simply an unresponsive battery.

It is essential to keep the key fob in good condition after it has been cleaned and resynchronized. You can ensure that your key fob working well for many years by wiping it clean using a damp towel and mild soap.

Reset the system

Even though today's high tech key fobs are equipped with more features that are safer, more secure, and are more convenient than they ever were however, they may still experience some issues. Fortunately, most of the time problems aren't severe or complex and are usually solved with simple solutions such as replacing the battery. If the issue is severe or cannot be resolved by simple techniques, an auto repair shop will replace and reprogram your key fob.

The primary function of the device is to lock or unlock your car, but you can also use it to activate certain vehicle features. The key fob can be used to lower or lift a sunroof. This feature can be very beneficial if you need to open the roof when stuck in traffic or when your hands are full. In the same way, the key fob can be used to call your car when it is parked in a tight spot.

A key fob's internal circuitry and buttons can become faulty due to manufacturing defects or wear and tear. The signs could include intermittent behavior or failure to lock or unlock the car. Moisture or other electromagnetic interference sources can sometimes affect the function of a keyfob. If your key fob is contaminated with dust or has become wet, it should be cleaned prior to attempting to us e it again.

If the device continues to behave unpredictably after replacing the key fob or cleaning the contacts, you might need to perform the factory reset. This can fix system bugs and improve device performance.

If you're unsure how to do the factory reset on your device, consult the official website of the manufacturer or your owner's manual. Certain devices require specialized tools to reset them, however you'll need to find the correct instructions for your specific model.

Contacting a mobile car locksmith in Apache Junction is another option to solve issues with your keyfob. These professionals can program and replace keyfobs for almost all models of cars. They can also fix keys with chips.
us