It can be difficult to set up the flap for your cat however, with the proper guidelines, it's not all that difficult. First, decide how fitting cat flap in upvc door panel would like the flap to be (on average the belly height). Mark this point on the door and use the template provided as a guide to drill.

If you have a kitten who is still a baby and you want to keep the door open, gently prop it slightly open and invite it to walk through. Reward the kitten every time it passes.

Measure the Door

A cat flap is an excellent way to let your pet come and go in and out of your home as it likes. This will help keep your cat healthy by ensuring that it gets exercise as well as being able to go back inside if trapped outside in the rainy weather, especially during the winter. It can also cut down on the amount of time you have to let it in or out and can keep your home safe by allowing you to know when it has gone out.

It is important to ensure that the cat flap is placed correctly in order to prevent your pet from being forced through through it by other animals (e.g. dogs). It is crucial to determine the height of your pet's belly and the doorway to your home so that you can make sure that the flap is at the proper height. You can adjust the height of your flap when your cat is smaller or taller than average.

Then, use a spirit-level to mark the middle of the door. This is where you'll install the flap. Using the marking as a guide, take a jigsaw and cut out the form of the flap inside the door. After you've cut the flap, sand down the edges to create smooth surfaces. Make any holes that are required.

Installing a cat flap ought to not take more than two hours. The process can be slightly more difficult if you have to install it on the form of a uPVC door or a composite one. This is due to the fact that these doors are available in a variety of thicknesses, which can affect the way that holes are cut. This is why we always recommend calling a professional to carry out the work, particularly if you have never worked with glass before.

Measure Your Cat

A cat flap can spare you from listening to your pet's meow to let it out or in. This is especially helpful when you're at work all day and your cat is stuck inside waiting until you get home in all weathers.

It is crucial to first measure your cat before you attempt the installation. It might seem like a straightforward task, but it's important to get the measurements right. If not, your cat might find it difficult to use.

First, ensure that your cat is calm before you begin taking measurements. You will have to hold your cat in a position that they are unable to move. Also, ensure that the measuring tape is flat and not curved against the body. Keeping the measuring tape or ruler against their body from the top of their head to the bottom of their tail will enable you to determine an exact measurement.

Once you've determined your cat's measurements, it's time to look at the door to decide where to put the flap. Position the flap at the level of your cat's belly. This will allow them to walk through the door with minimal effort. This will also stop the flap from making a lot of noise as it moves back and back.

You should also think about the thickness and the structure of the uPVC door or composite. While timber doors are all of the same thickness, uPVC and composite doors can be very different in their overall structure, which can make fitting the cat flap more difficult since you have to make sure that the hole you cut is the right size for your pet.

You can also use the template included in the instructions to mark the position of the hole in the door. This will allow you to determine where the hole needs to be located and ensure that the template is positioned properly on the door. It is also helpful to utilize a spirit-level to make sure that the template is placed in a straight line against the door.

Cut the Flap

Before you can put in your cat flap, you'll must cut the door panel in order to create a space large enough for it. This can be a tricky job, and it is recommended to seek out the assistance of a professional cat flap fitter to complete this task in case you don't have the knowledge or skills to complete the task yourself. You can also refer to the instructions that come with the kit to discover how to do it properly.

To do this, you have to determine the height of your cat or kitten's belly. Use this as an indicator point. A good guideline is to put the flap of your cat about 10 centimeters off the ground, as this is the typical belly height for cats. This will allow your cat to move through the flap without difficulty and make it more difficult for other cats and nosy neighbours to get inside or out.

Once you've decided where the cat flap should be positioned, mark this location on the door using a pencil. Next, if your kit has a paper template, lay this over the door and use the markings to drill holes in every corner of the template. Then, you should be able cut out the shape of the template and replace it with your cat flap.

You can install your cat flap yourself in a wood or uPVC door if you are confident using the Jigsaw. Be cautious not to cut through the vertical rails or mullions of your door. You can use a jigsaw to cut the panel into a circle or square, depending on the design of your cat flap. Take your time and don't force the jigsaw into cutting faster.

Once the hole is cut then carefully insert the flap of cat food into its new location and make sure that it is firmly fixed. If it has caps for screws, then put them onto the screws that protrude. Once the screws have been installed then sand the rough edges and then apply sealant to any gaps. This will stop the entry of draughts into your home.

Fit the Flap

If you have a basic cat flap, you can open it and encourage your pet to go through by putting a small amount of cat food on the outside of the door. You can also try pushing the cat through using your hands or with a stick. Once your cat has become accustomed to walking through the flap it will be capable of walking through the flap whenever it wants. This will allow you to let it in and out at any time it's wanted.

It is possible to put an animal flap into an UPVC door or glass door, however it might not be as simple as installing one inside a wooden exterior door. This is because the doors made of UPVC and some kinds of glass doors don't have an even thickness. This can have a dramatic effect on how you cut the opening for the flap and will also affect whether the flap fits correctly once it's been put in place.

Based on the type of cat flap you select It could include a mounting kit as well as a template that will tell you exactly where to drill holes for it. If the kit does not include a template you can copy it to make your own. When cutting, it's important to avoid pushing the jigsaw too to the point that you create a bigger hole than necessary in your door.

The majority of cat flaps are rectangular or square in shape, however there are some that are circular, and are typically more difficult to install. If you have a circular flap, make sure that the hole is in the right place on your door. Otherwise, the cat may not be able to access it, and could be stuck outside the whole day (or night).

Certain cat flaps come with locks that let you regulate when your cat is allowed to enter and leave. These are useful for pets who are afraid of going out in the dark or returning inside at night. They can also be helpful when you are working all day. The lock can be engaged to allow entry or exit, and some locks can be locked in either direction which allows you to close the door completely, which is especially helpful for sick or elderly cats who don't want to go out in bad weather.
fitting cat flap in upvc door panel